Introduction

Welcome to the AC Infinity UIS™ Platform, the most advance and versatile environmental control ecosystem in the world! Choose from an expanding selection of equipment that can work together to achieve your ideal environment. Mix and match any eight to connect to our Controller AI+ to provide each with their own advance programming, tailored to your application. Our innovative system can finely optimize each equipment's output levels from 0 to 10 such as fan speed and light intensity, to precisely reach your target climate. 

MODELS – Controller AI+
EQUIPMENT CONTROLLED - All UIS™ Devices, see Compatibility List

SENSOR CONTROLLED  – All UIS sensors
NUMBER OF EQUIPMENT - 8 Devices, Independent Programming
CONNECTOR TYPE - UIS
CONTROL TYPE - PWM 10 Levels
PROGRAMS - Temperature and Humidity Triggers, VPD Triggers, Timers, Cycles, Schedules, Advance Programs via App
SETTINGS - Max/Min Levels, Dynamic Transitions, Lock/Hide Display, F°/C°, Calibration, and More
CLIMATE SENSORS - Temperature, Humidity, and VPD
APP CONNECTION - Bluetooth or Wi-Fi (2.4 Ghz)

ctrAI+-header-800x339.jpg

 

Quick Start

ctrAI+-quick-start.jpg

  1. Plug the power adapter into the base of the controller, then proceed to plugging into power outlet.
  2. Plug the temperature/humidity/VPD sensor into the designated port on the bottom of the controller.
  3. Plug your first UIS device into one of the eight ports on the base of the controller.
  4. Press the "Port Button" until you reach the port that your device was plugged in. See below for diagram.
  5. Press the "Mode Button" until you reach the desired program for your device to run. See below for Mode info.
  6. Press the "Up/Down Button" to adjust your Mode's parameters, program will automatically start running.
  7. Check for settings that may affect your programming, see below. Return to desired Mode to resume program.
  8. Plug in another UIS device if needed, then repeat steps 3 to 6.

 

Controller Diagram

ctrAI+-screen-2.jpg

Programming Modes

modes-and-settings-ctr89q.jpg

• OFF Mode – Set the device to turn off.
• ON Mode – Set the device to run continuously at a level from 0 to 10. 
AUTO Mode – Set temperature and humidity triggers that will turn the device on or off.
VPD Mode – Set VPD (vapor pressure deficit) triggers that will turn the device on or off.
• TIMER TO ON Mode – Set a one-time countdown that will turn the device on once it ends.
• TIMER TO OFF Mode – Set a one-time countdown that will turn the device off once it ends.
• CYCLE Mode – Set an on and off duration that your device will repeat continuously.
• SCHEDULE Mode – Set an on and off clock time that your device will repeat daily.

 

Alert Icons

alert-icons-blue-l.jpg

1. Advance Programming – Displays when an advance program set in the app is active.
2. Alarm – Flashes when an alert set in the app is triggered.
3. Temperature/Humidity Alert – Flashes if the temperature/humidity meets your set trigger point.
4. Timer Alert – Flashes when a countdown has completed in the TIMER, CYCLE, or SCHEDULE Mode.
5. VPD Alert – Flashes whenever either VPD mode triggers activate your device.
6. Bluetooth/WiFi – Appears when the physical controller is connected to the app via Bluetooth or WiFi.
7. Display Lock Alert – Displays when you lock the controller.
8. Device Error Alert – Flashes when a connected device detects an issue. Check your devices to troubleshoot any issues.

App Control, Alerts, and Advance Programs

Connect your controller to the AC Infinity App to unlock advance programming, data graphs, alerts, and more. Follow the step-by-step instructions on Connecting to the App page, and then view the App Overview page to learn more about using the App.